22356.1204 - Threaded Lock Pins
self-locking, with axial bearing

Threaded lock pins are used for quick fastening, locking, adjusting, changing, clamping, connecting and securing. Quickly and easily unlockable for frequently repeated connections.

By pressing the button, the threaded segments unlock and the threaded lock pin can be inserted into or removed from a threaded hole. A time-consuming screwing in and out is unnecessary.

The thread lock pin is characterised by the following features and advantages:

  • Corrosion-protected
  • No time-consuming screwing in and unscrewing
  • Self-locking due to spring force
  • With axial bearing

The advantages of the axial bearing:

  • Double clamping force with the same grip size by reducing surface friction.
  • Protection of the component due to fixed contact surface.
  • Low setting behaviour due to higher pretensioning force in the bolt or thread.
  • Less force required to release.

這項商品 22356.1204 - Threaded Lock Pins self-locking, with axial bearing / (d1: M10, l1: 20 mm) 為商品項目的相對應商品 Threaded Lock Pins self-locking, with axial bearing (EH 22356.)

材质 
d1 [mm]
l1 [mm]
鎖固力矩的結果 ~1) - [Nm]
夹持力量  ~2) - [kN]
剪力抵抗力,加倍的  3) min  [kN]
品项品号.
文件
价格 [€]
可用
材质 :
不锈钢   
d1 [mm]:
M10
l1 [mm]:
20 mm
鎖固力矩的結果 ~1) [Nm]:
3,5 Nm
夹持力量  ~2) [kN]:
2,9 kN
剪力抵抗力,加倍的  3) min  [kN]:
62,5 kN
品项品号.:
22356.1204
文件
Threaded Lock Pins
  • 不锈钢   
  • d1: M10
  • l1: 20 mm
  • d2 -0,07: 8,35 mm
  • d3: 40 mm
  • d4: 30 mm
  • l2: 36 mm
  • l3: 84,4 mm
  • l4: 10 mm
  • 定位螺牙: M10
  • Operating temperature range min : -30 °C
  • Operating temperature range max. : 80 °C
  • 起动 扭力  max. : 5 Nm
  • 夹持力量  max. : 4,2 kN
  • 鎖固力矩的結果 ~1): 3,5 Nm
  • 夹持力量  ~2): 2,9 kN
  • 重量: 180 g
  • 剪力抵抗力,加倍的  3) min : 62,5 kN
Threaded Lock Pins

材质 

梢子零件

  • 不锈钢 1.4542、沉淀硬化 

把手

  • Thermoplastic PA 6, black, dull similar to RAL 9005

按钮

  • 铝,橘色,阳极

螺纹元件

  • 不锈钢 1.4542、沉淀硬化 

Axial bearing

  • 不锈钢   

弹簧

  • 不锈钢   

注意事项

特殊的样式欢迎洽询。 

Due to the thread geometry, the clamping force is higher with the smaller thread sizes.

组装 

Threaded lock pins can only be mounted into a thread that is true to gauge.

Mounting:

  1. Press in the button and hold it down.
  2. Insert the threaded lock pin.
  3. Release the button (The button must be back in its original position.).
  4. Tighten the threaded lock pin by hand as required.
  5. It must be ensured that the threaded segments are engaged in the mounting thread.

Dismantling:

  1. Unscrew the threaded lock pin approx. a quarter of a turn anticlockwise.
  2. Press in the button and hold it down.
  3. Remove the threaded lock pin.
  4. Release the button.

操作

The threaded segments are unlocked by pressing the button.

标题
分类
类型
直接下载
下载栏
规格表 22356.1204
分类:
规格表
类型:
PDF
直接下载:
下载栏:
下载栏
直接下载
更多文件格式

Additional variants of this article


配件

Can easily be fitted with retaining cable EH 22355.

更多产品

符合 RoHS

含铅 - 符合例外 6a / 6b / 6c

 

含有 >0.1% w/w 的 SVHC 物质

含铅 - SVHC [REACH] 清单截至 2024 年 6 月 27 日

 

包含 65 号提案的物质


铅暴露会导致癌症和生殖伤害
https://www.P65Warnings.ca.gov/

 

不含冲突矿物

„本产品不含来自刚果民主共和国或邻近国家的任何被指定为“冲突矿物”的物质,例如钽、锡、金或钨。