22352.2020 - Threaded Lifting Pins
self-locking, for centre holes according to DIN 332
This threaded lifting pin is used when there is a threaded hole with a counterbore according to DIN 332.
Heavy-duty lifting element for quick and easy use, with moveable shackle and locking stud to provide protection against unintentional unlocking. For lifting loads, the threaded lifting pin is inserted into a threaded hole. In contrast to a ringbolt, time-consuming screwing in and out is therefore unnecessary.
All versions are corrosion-protected. The version made of stainless steel is also resistant to corrosion and weathering, so it is also suitable for external use. In addition, the high-strength, precipitation-hardened pin makes extreme loads possible.
This article 22352.2020 - Threaded Lifting Pins self-locking, for centre holes according to DIN 332 / (d1: M20, l1: 25 mm) is one variant of the article group Threaded Lifting Pins self-locking, for centre holes according to DIN 332 (EH 22352.)
More details
- Heat-treated steel
- d1: M20
- l1: 25 mm
- d2 -0.07: 17.75 mm
- d3: 30 mm
- d4: 20.7 mm
- l2: 31.8 mm
- l3: 39.1 mm
- l4: 53.7 mm
- l5: 32.6 mm
- l6: 36 mm
- l7: 56 mm
- l8: 109.2 mm
- l9: 30 mm
- l10: 17 mm
- Load capacity according to DIN EN 13155 F1: 16.6 kN
- Load capacity according to DIN EN 13155 F2: 7.7 kN
- Load capacity according to DIN EN 13155 F3: 5.8 kN
- Locating thread: M20
- Operating temperature range max.: 250 °C
- Weight: 554 g
Material
Pin part
- Heat-treated steel, tempered, manganese phosphated
Press button
- Aluminium, orange, anodised
Threaded element
- Stainless steel 1.4542, precipitation-hardened
Shackle
- Heat-treated steel, tempered, manganese phosphated
Spring
- Stainless Steel
Assembly
Threaded lifting pins can be mounted into a thread that is true to gauge.
Mounting:
- Press in the button and hold it down.
- Insert the threaded lifting pin.
- Release the button (The button must be back in its original position.).
- Tighten the threaded lifting pin by hand, until it bears compleately on the bearing surface.
- It must be ensured that the threaded segments are engaged in the mounting thread.
Dismantling:
- Unscrew the threaded lifting pin approx. a quarter of a turn anticlockwise.
- Press in the button and hold it down.
- Remove the threaded lifting pin.
- Release the button.
Operation
Each threaded lifting pin contains an instruction manual with an EC Declaration of Conformity.
RoHS compliant
Contains lead - compliant according to exceptions 6a / 6b / 6c.
Contains SVHC substances >0,1% w/w
Contains lead - SVHC list [REACH] as of 27.06.2024.
Contains Proposition 65 substances
Lead can cause cancer and reproductive harm from exposure
https://www.P65Warnings.ca.gov/
Free from Conflict Minerals
This product does not contain any substances designated as "conflict minerals" such as tantalum, tin, gold or tungsten from the Democratic Republic of Congo or adjacent countries.