22982.0106 - Rod Ends
DIN 12240-4, with male thread
Rod ends are suitable for universal use in applications subject to dynamic loads. As well as use in corrosion-risk areas, the design in stainless steel can also be used under higher dynamic loads.
Rod ends are used for bearings where movements between shaft and housing are necessary, and where the movements are not in a straight line.
Rod ends are ready-to-install elements manufactured to DIN ISO 12240-4 (dimension series K). The PTFE fabric inserted into the bearing shell means that the rod ends are maintenance-free.
Please take note of the technical information which follows these product pages.
This article 22982.0106 - Rod Ends DIN 12240-4, with male thread / right hand thread (d1: 8 mm, l1: 42 mm) is one variant of the article group Rod Ends DIN 12240-4, with male thread (EH 22982.)
More details
- right hand thread, Free cutting steel
- d1: 8 mm
- l1: 42 mm
- b1: 12 mm
- b2: 9 mm
- d2: 24 mm
- d3: M8
- d4: 10.4 mm
- l2: 54 mm
- l3: 25 mm
- α: 14°
- Dynamic carrying figure C: 16.7 kN
- Static carrying figure C0: 11 kN
- Operating temperature range min.: -50 °C
- Operating temperature range max.: 150 °C
- Weight: 38 g
Material
Body
- Free cutting steel, turned, zinc-plated
Joint ball
- Roller bearing steel, hardened, ground, polished
Bearing
- PTFE fabric
Bearing shell
- Free cutting steel, zinc-plated by galvanization
RoHS compliant
Contains lead - compliant according to exceptions 6a / 6b / 6c.
Contains SVHC substances >0,1% w/w
Contains lead - SVHC list [REACH] as of 27.06.2024.
Contains Proposition 65 substances
Lead can cause cancer and reproductive harm from exposure
https://www.P65Warnings.ca.gov/
Free from Conflict Minerals
This product does not contain any substances designated as "conflict minerals" such as tantalum, tin, gold or tungsten from the Democratic Republic of Congo or adjacent countries.