Step Jaws for gripper studs
EH 1702.
- Top face and side face, with thread for mounting of parallel jaws
- Ground clamping surfaces
- Additional threads for mounting the interchangeable jaws (Art. No. 1701.250-1701.280) on the high side
- Suitable for mounting of gripper studs
- First and second clamping operations, without adjustment
- Mountings for click system (Art. No. 1701.190-1701.200) on the high side of the jaw
Attention:
These are rigid jaws which are only suitable for rectangular workpieces (saw cuts) - parallelism less or equal 0.5 mm (// <=0.5) and cylindrical workpieces - roundness less than or equal 0.5 (O <=0.5).
Your selection resulted in 2 hits
More details
- Jaw, fixed – picture 1
- Jaw width: 125 mm
- b1: 124.4 mm
- b2: 74 mm
- l1: 92 mm
- l2: 43 mm
- l3: 34 mm
- h1: 39.5 mm
- h2: 20 mm
- c: 24 mm
- Weight: 3 kg
- Jaw, movable – picture 2
- Jaw width: 125 mm
- b1: 124.4 mm
- b2: 74 mm
- l1: 70 mm
- l2: 40 mm
- l3: 47 mm
- h1: 39.5 mm
- h2: 20 mm
- c: 24 mm
- Weight: 1800 g
Material
- Steel, hardened
RoHS compliant
Compliant according to Directive 2011/65/EU and Directive 2015/863.
Does not contain SVHC substances
No SVHC substances with more than 0.1% w/w contained - SVHC list [REACH] as of 27.06.2024.
Does not contain Proposition 65 substances
No Proposition 65 substances included.
https://www.P65Warnings.ca.gov/
Free from Conflict Minerals
This product does not contain any substances designated as "conflict minerals" such as tantalum, tin, gold or tungsten from the Democratic Republic of Congo or adjacent countries.
What is the difference between the MS 125 and an ordinary machine vice?
Since it comes with a modular design and can be paired with a large variety of jaws and associated equipment, the MS 125 is considerably more versatile than a standard machine vice.