2B150.0060 - Lateral Plunger
smooth, without seal - INCH
To be used for positioning and applying pressure, e.g. during painting and sandblasting.
This article 2B150.0060 - Lateral Plunger smooth, without seal - INCH / Light spring load (d1: 7/16 in, d2: 0.197 in, Spring load F max.1: ~ 4.5 lb) is one variant of the article group Lateral Plungers smooth, without seal - INCH (EH 2B150.)
More details
- Pin: Thermoplastic/Light spring load
- d1: 7/16 in
- d2: 0.197 in
- Spring load F max.1): ~ 4.5 lb
- l1 -0.08: 0.433 in
- l2: 0.263 in
- Stroke s: 0.031 in
- Location hole D H8: 7/16 in
- x2): 0.063 in
- Operating temperature range max.: 176 °F
- Weight: 0.062 oz
for lateral plungers, smooth
d1: 10 mm
- assembly tool
- d1: 10 mm
- Weight: 49 g
Material
Body
- Aluminium AI
Spring
- Stainless steel
Pin
- Thermoplastic POM, white
Characteristic
Version light spring load = spring from stainless steel
Assembly
Installation by pressing in.
Formula for calculating the center distance for the mounting hole:
l0 = z/2 + w + x,
l0 = center distance,
y = workpiece height,
w = workpiece length,
x = coordinate dimension,
s = stroke,
z = stop diameter
Calculation dimension x:
y greater than or equal to l2 - d2/2,
then x = d2/2 - s
(value x for this case see table)
or
y smaller than l2 - d2/2,
then x = d2/2 - s - [(l2 - d2/2 - y) * 0,123]
RoHS compliant
Compliant according to Directive 2011/65/EU and Directive 2015/863.
Does not contain SVHC substances
No SVHC substances with more than 0.1% w/w contained - SVHC list [REACH] as of 27.06.2024.
Does not contain Proposition 65 substances
No Proposition 65 substances included.
https://www.P65Warnings.ca.gov/
Free from Conflict Minerals
This product does not contain any substances designated as "conflict minerals" such as tantalum, tin, gold or tungsten from the Democratic Republic of Congo or adjacent countries.