22354.5010 - Threaded Lifting Pins
self-locking, with handle
The carrying element can be used universally for transporting workpieces, workholding systems, components, containers etc. using manual force.
Heavy-duty lifting element with handle for quick and easy use. For lifting loads, the threaded lifting pin is inserted into a threaded hole. In contrast to a ringbolt, time-consuming screwing in and out is therefore unnecessary.
Corrosion and weathering resistant, thus also suitable for outdoor application. Very solid, precipitation-hardened pin with an extreme load capacity.
This article 22354.5010 - Threaded Lifting Pins self-locking, with handle / (d1: M10, l1: 14 mm) is one variant of the article group Threaded Lifting Pins self-locking, with handle (EH 22354.)
- d1: M10
- l1: 14 mm
- d2 -0.07: 8.35 mm
- d3: 21.5 mm
- d4: 14 mm
- l2: 20 mm
- l3: 40 mm
- l4: 60.3 mm
- l5: 100 mm
- l6: 10 mm
- Load capacity F1: 500 N
- Locating thread: M10
- Operating temperature range max.: 250 °C
- Weight: 197 g
Material
Pin part
- Stainless steel 1.4542, precipitation-hardened
Handle
- Aluminium, blue anodised
Press button
- Aluminium, orange, anodised
Threaded element
- Stainless steel 1.4542, precipitation-hardened
Spring
- Stainless steel
Assembly
Threaded lifting pins can be mounted into a thread that is true to gauge.
Mounting:
- Press in the button and hold it down.
- Insert the threaded lifting pin.
- Release the button (The button must be back in its original position. A clearly visible green marking on the press button indicates the correct position.).
- Tighten the threaded lifting pin by hand, until it bears compleately on the bearing surface.
- It must be ensured that the threaded segments are engaged in the mounting thread.
Dismantling:
- Unscrew the threaded lifting pin approx. a quarter of a turn anticlockwise.
- Press in the button and hold it down.
- Remove the threaded lifting pin.
- Release the button.
Operation
Each threaded lifting pin is supplied with operating instructions. This document is also available for download as a PDF.
Non-RoHS compliant
Not compliant according to Directive 2011/65/EU and Directive 2015/863.
Contains SVHC substances >0,1% w/w
Contains lead - SVHC list [REACH] as of 27.06.2024.
Contains Proposition 65 substances
Lead can cause cancer and reproductive harm from exposure
https://www.P65Warnings.ca.gov/
Free from Conflict Minerals
This product does not contain any substances designated as "conflict minerals" such as tantalum, tin, gold or tungsten from the Democratic Republic of Congo or adjacent countries.