22350.0714 - Lifting Pins
self-locking, stainless steel
Heavy-duty lifting element for quick and easy use, with moveable shackle and locking stud to provide protection against unintentional unlocking. Special lifting devices, e.g. threads for ring bolts, are no longer required on the workpiece.
Corrosion and weathering resistant, thus also suitable for outdoor application. Very solid, precipitation-hardened pin with an extreme load capacity.
This article 22350.0714 - Lifting Pins self-locking, stainless steel / (d1 -0.04 -0.08: 8.3 mm, l1 +0.6: 25 mm) is one variant of the article group Lifting Pins self-locking, stainless steel (EH 22350.)
More details
- d1 -0.04 -0.08: 8.3 mm
- l1 +0.6: 25 mm
- d2: 9.65 mm
- d3: 21.5 mm
- d4 min.: 10.05 mm
- l2 ±0.5: 8.75 mm
- l3: 25.7 mm
- l4: 36 mm
- l5: 27 mm
- l6: 30 mm
- l7: 49 mm
- l8: 87.5 mm
- l9: 21.5 mm
- Load capacity according to DIN EN 13155 F1: 1.5 kN
- Load capacity according to DIN EN 13155 F2: 1.2 kN
- Load capacity according to DIN EN 13155 F3: 0.5 kN
- x min.: 1.5 mm
- x max.: 15 mm
- Location hole H11: 8.3 mm
- Operating temperature range max.: 250 °C
- Weight: 233 g
Material
Pin part
- Stainless steel 1.4542, precipitation-hardened
Press button
- Aluminium, red anodised
Shackle
- Stainless steel 1.4571
Spring
- Stainless Steel
Assembly
Simple H11 boreholes are sufficient.
Mounting:
- Press in the button and hold it down
- Insert the lifting pin
- Release the button (The button must be back in its original position)
Dismantling:
- Press in the button and hold it down.
- Remove the lifting pin.
- Release the button.
Operation
Each lifting pin contains an instruction manual with an EC Declaration of Conformity.
Additional variants of this article
Accessories
As accessories, we offer matching locating bushings for d1 = 8, 10, 12, 16 and 20
Further products
- Lifting Pins, self-locking
- Locating Bushings, for lifting pins
- Locating Bushings, plain, for lifting pins
- Locating Bushings with Seal, plain, for lifting pins
- Threaded Lifting Pins, self-locking
- Threaded Lifting Pins, self-locking, for centre holes according to DIN 332
- Threaded Lifting Pins, self-locking, with rotatable shackle
- Threaded Lifting Pins, self-locking - INCH
- Threaded Lifting Pins, self-locking, with rotatable shackle - INCH
RoHS compliant
Contains lead - compliant according to exceptions 6a / 6b / 6c.
Contains SVHC substances >0,1% w/w
Contains lead - SVHC list [REACH] as of 27.06.2024.
Contains Proposition 65 substances
Lead can cause cancer and reproductive harm from exposure
https://www.P65Warnings.ca.gov/
Free from Conflict Minerals
This product does not contain any substances designated as "conflict minerals" such as tantalum, tin, gold or tungsten from the Democratic Republic of Congo or adjacent countries.